Leads
AWG #22, stranded, TFE insulated
Material
Case: Stainless steel, copper alloy tip
The Resistance Thermometer will meet the resistance-temperature relationship and tolerance specified in IEC 751 Class B
Tolerance on Lead Length
71" [1803] and under: +2/-0" [+51/-0]
72" to 119" [1829 to 3023]: +4/-0" [+102/-0]
120" [3048] and over: +6/-0" [+152/-0]
If probe is matched with a temptran
Leadwire tolerance will be +6/-0" [+152/-0]
Case may be cut to shorter length. Use care not to damage leadwire insulation. Locate the slip-fit TFE sleeve in end of cut-off case to protect leadwire insulation at point of emergency. Minimum A for cut-off case is 28 (2.8") [71]
|